EN 14604 TUYA WiFi Wireless Interlinked Smoke Alarms

Introduction

The WiFi+RF Interlinked Smoke Detector is produced by using infrared photoelectric sensor with specialstructure design,reliable MCU, and SMT chip processing technology.

It is characterized by high sensitivity, stability and reliability, low power consumption,beauty, durability, and easy-to-use. It is suitable for smoke detection in factories,homes, stores, machine rooms, warehouses and other places.

It is not suitable for use in the following places:

(1) Places with smoke retention under normal condit ions.

(2) Places with heavy dust, water mist, steam, oil mist pollution and corrosive gas.

(3) Places with relative humidity greater than 95%.

(4) Places with ventilation speed greater than 5m/s.

(5) The product cannot be installed in the corner of the building.

There Are Features

1.With advanced photoelectric detection components, high sensitivity, low power consumption, quick response recovery, no nuclear radiation concerns;

2.Dual emission technology, improve about 3 times false alarm prevention;

3.Adopt MCU automatic processing technology to improve the stability of products;

4.Built-in high loudness buzzer, alarm sound transmission distance is longer;

5.Sensor failure monitoring;

6.Battery low warning;

7.Automatic reset when the smoke decreases until it reaches an acceptable value again;

8.Manual mute function after alarm;

9.All around with air vents, stable and reliable;

10.SMT processing technology;

11.Product 100% function test and aging, keep each product stable (many suppliers do not have this step);

12.Radio frequency interference resistance (20V/m-1GHz);

13.Small size and easy to use;

14.Equipped with wall mounting bracket, quick and convenient installation.

Packing list

1 x White box

1 x WiFi+RF Interconnected Smoke Detector

2 x 3 Year Batteries

1 x Instruction Manual

1 x Mounting Screws

Outer box information

Qty：63pcs/ctn

Size：33.2*33.2*38CM

G.W：12.5kg/ctn